Author: scott
Subject: AMX240 Questions
Posted: 24 Aug 2015 at 9:05pm
One other piece of information. If I pull the breaker on the lighting circuit (pin 7 voltage goes to 0) then the lights go full bright which is indicated in the manual. This seems to indicate the unit is wired correctly.
Subject: AMX240 Questions
Posted: 24 Aug 2015 at 9:05pm
One other piece of information. If I pull the breaker on the lighting circuit (pin 7 voltage goes to 0) then the lights go full bright which is indicated in the manual. This seems to indicate the unit is wired correctly.